Sorry, this item is out of stock
Plasmolifting Centrifuge XC 2415 is able to balance out the weight of the tubes by rotating at a constant speed (4000rpm x five minutes). Through the production of centrifugal force, the machine helps separate plasma in the tubes (which is rich in platelets). When obtaining PRP (platelet-rich plasma), it is recommended to use a centrifuge with a fixed- angle rotor (like Plasmolifting Centrifuge XC 2415).
To use the Plasmolifting Centrifuge XC 2415, open the lid and put the tube holder into the holes. The holder of the device comes in the size of 12 X 15ml tubes. It is important to place an even number of specimen tubes on opposite sides of the machine. Ideally, every tube should contain the same amount of fluid (this allows for a smooth spinning motion). Plasmolifting Centrifuge XC 2415 may shake if the tubes are unbalanced. Use the soft foam provided if the tubes are too short for the holder. For best results, the tubes should be securely sealed, and fit tightly in the holder shell. The speed (and time) settings can be adjusted with the one-touch switch panel. Alternatively, the memory setting can be used to run the previous program.
Plasmolifting Centrifuge XC 2415 is not likely to cause any side effects when used correctly. Before using the device, read the product leaflet carefully and follow all instructions provided by the manufacturer. PRP, on the other hand, may cause transient side effects such as bruising, swelling, redness, tenderness, pustules and itching at the site of injection.
